Posts Tagged ‘Vivado’

Very few know how Powerful this FPGA combination can be – Here is how to Control it

Monday, August 8th, 2016

Greetings inhabitants of the FPGA world! Today’s post is about a project that can be a huge part of a number of other different projects that use FPGA as their core. Be it a claw machine or a drone or a navigator robot, interfacing Joysticks with FPGA will be a fundamental part of many of your future work. This article will help you control any device on a two dimensional platform with the code for movement in the XY plane. Moving in 3D (flight in the case of drones) can be easily achieved by using two joysticks in place of one.

The Author has wrapped up her project in a set of 5 steps to keep things short and sweet. The hardware needed for this project is simply a FPGA board, a system with Xilinx Vivado installed, Digilent PmodJSTK and a USB A to B micro cable. A general idea regarding the project is given in Step 2. The Joystick uses the SPI interface to receive and transmit data from and to the FPGA board.

The code for this project has been readily supplied in step 3 as a zip file. The contents can be sorted into a number of modules which have been coded in Vivado 2015.4. So using a different version of the software will mean you need to copy paste the codes into a new project file in your system.

The code can then be converted to bit stream to programme the board. You can also programme 2 joysticks (for Drones or RC Cars) since only the top bank of the PMOD Header in the FPGA board (you may need to adapt this to your own board) has been used for 1 joystick.


By Commanderfranz

How To Control A Joystick With Your FPGA

Tuesday, April 5th, 2016

Fantastic tutorial here today about how to add and control a joystick, using your FPGA.

This project is based upon a demo written in Verilog. However, the author used a Basys 3 FPGA board and thus she needed to transfer the Verilog code over to Vivado.

The hardware needed for this project is pretty simple, just the FPGA board, an USB  A to B micro cable and the joystick, which is connected via SPI.

Pretty much an implementation project if you have a Basys 3, Nexys 4 or Zybo FPGA board. You can find the files you need here.

In case you have a different FPGA, you will have to transfer or adapt the files to be read by your required programming environment.

Very easy tutorial that all that requires is you to follow the simple steps and, of course, buy a joystick!

Try this and you won´t regret as a whole new world of possibilities will be open for you and your FPGA, from playing video games to controlling a servo motor…More about this coming soon.

Have fun!


By kaitlyn1franz

Clever Exploitation Of Vivado HLS To Make A FIR Filter And More

Tuesday, September 3rd, 2013

By way of Colin O’Flynn over at NewAE, we’ve got a wonderful video showing how to basically exploit the Xilinx HLS (High-Level Synthesis) in Vivado to make your own FIR filter in only about 25 minutes! I could attempt to write a synopsis of what is covered in the video, but as they say – a video is worth 10,000 words. It is a bit long, but if you’ve got the patience for it you might walk away with a couple of new tricks up your sleeve!

Vivado – it’s Xilinx’s new design tool system. Part of this is the ‘High Level Synthesis’ option – something you can also get it seems for ~$2k. I’m using these design tools in the “wrong” way, in that I’m generating HDL & then synthesizing it with the normal ISE chain. Some of the parts I’m using aren’t officially supported in Vivado it seems. Plus I’m currently more used to the ISE design flow, so don’t want to throw everything away.

After you watch the video, don’t forget to click on over to Colin’s site at NewAE to check out the full scoop.

(via NewAE)